.svg){kind=small}
3D printing service and printers · Whitchurch, Cheshire
Print it with us, or print it yourself.
Upload a file. See the price now.
HP Multi Jet Fusion nylon or SLA resin, priced online the moment you upload and posted from Whitchurch. One part or ten thousand, with no minimum order and no setup fee.
- Instant
- price online, from your file
- PA12 · PA11
- MJF nylon, dyed black or grey
- 1.4 m
- largest single SLA part we run
Your own resin printer, and the resin to keep it running.
The HeyGears Reflex range sits on a bench and runs every UltraPrint resin from a tuned profile, so there is nothing to dial in. Choose the printer, choose the resins, then reorder them from us when the bottle runs low.
- Four Reflex printers, from £1,199 ex VAT
- From a first professional resin printer to the 350 mm Reflex 2 Pro.
- UltraPrint resins, from £33 ex VAT
- Modelling, ABS-like, wear-resistant, flexible, clear and high-temperature grades.
- Reorders and spares from the UK
- Resin, tanks, films and screens from the same people who set the printer up.
The Reflex printers
Compare the range →
Resins people reorder
Every HeyGears resin →
PAH270 Injection-Molding Resin
Tooling, moulds, jigs, fixtures and demanding engineering work.
£89ex VAT
Order by 3pm, out the same day
Printed spares and stock parts ship from Whitchurch.
Pay on invoice
30-day terms for trade accounts, or card at checkout.
No minimum order
One part is a job. So is ten thousand.
Engineers, not a call centre
The person who prices it runs the machines.
Two ways to get the part
We print it for you, or you print it yourself
Most people start with the first and end up doing both.
We print them
Our machines, your parts
HP Multi Jet Fusion for nylon production runs, SLA for anything that has to look finished.
- Priced online the moment you upload, no minimum order
- Dyed, vapour-smoothed or media-blasted on request
- Repeat parts kept as a model and reprinted on demand
You print them
Your machine, our support
UnionTech and DWS SLA, installed, commissioned and supported by the engineers who ran them here first.
- Open-platform resins, so you are not locked to one supplier
- Materials and spares from UK stock
- Training at ours, or on your floor with your own parts
Parts we already make
On the shelf we show the count. If we have to print one: about 3–4 working days, then it ships. Allow up to about two weeks door-to-door in Europe.
Scan-to-Part
Can’t buy the part any more?
Send us the broken one. We scan it, rebuild the model and print it. If enough people want the same part, it goes in the shop and stays there.
How Scan-to-Part worksDesign request
A club that all needs the same part?
Show us there is demand and we will scan and design it at no charge, then list it on the shop.
Request a new partHP Multi Jet Fusion
Production parts, without the tooling bill
Multi Jet Fusion packs the whole chamber with parts, fuses them in nylon and gives you something you can bolt into a product, not a display model.
- Faster builds
- Days instead of weeks, with the chamber packed full of parts.
- Less waste
- Powder that didn’t fuse goes back in, rather than in the bin.
- Lower cost per part
- No tooling to pay for, so ten parts makes sense as well as ten thousand.
Straight off the printer
Vibro-finished
Dyed black
Printers we sell and run ourselves
We do not sell a machine we have not had on the floor. Prices depend on configuration, so most of these are a demonstration rather than a checkout.
UNIONTECH
UnionTech RSPro Series SLA
Large-format industrial SLA up to a 2.1 m build — full-size parts, props and patterns in one piece, on a completely open resin platform.
Book a demonstrationPrice on application
DWS
DWS XCELL 300S
Automated mid-volume SLA production on a 300 x 300 x 550 mm build area, with a single BlueEdge laser and Smart Coating for unattended runs.
Book a demonstrationPrice on application
UNIONTECH
UnionTech Pilot Series SLA
Industrial SLA in an open material system — run Somos or any resin that suits the job. PILOT 250 and PILOT 450, from a 250 mm to a 450 mm platform.
Book a demonstrationPrice on application
Shop by brand
DWS and UnionTech stereolithography, HeyGears Reflex for the bench, and the resins they run.
Pick the material by what the part has to survive
Twenty-nine resins and powders, and the honest answer is that four of them cover most jobs.
Tough and functional
Jigs, housings, brackets — things that get dropped.
PA12 nylon · Somos Element
Clear and watertight
Flow rigs, lenses, anything you look through.
Somos WaterShed XC
Hot and stiff
Under-bonnet, tooling, anything near heat.
Somos PerFORM
Big single pieces
Panels and ducts up to 1.4 m, with nothing bonded.
Somos Taurus
Parts and tooling for
Instant quote
Drop the file in. See the price now.
Not sure which material? Ring 0330 229 0175 and somebody who runs the machines will tell you.
- Upload the fileDrop your 3D file into the instant quote, one part or a batch.
- See the pricePick the material and the quantity and the price is on screen straight away.
- Order it and it shipsThe parts arrive finished, not raw, out of Whitchurch, Cheshire.
Get an instant quote
- Upload your 3D file
- Choose the material and how many
- See the price and order online
Opens our quoting tool in a new tab. Want advice on the material or process first? Contact us or ring 0330 229 0175.