.svg){kind=small}
HeyGears 3D printers UK
Professional resin printing as one system: the Reflex 3D printers, UltraPrint engineering resins, Blueprint Studio plus UltraCraft Wash and Cure, set up to work together. Supplied in the UK by 3D Printworx, with UK prices on every model.
From £1,199 ex VAT, with every price on the page. Call 0330 229 0175
- 4
- Reflex 3D printers, from first resin 3D printer to production
- 1,032
- OptiZone light zones on the Reflex 2 Pro
- 350 mm
- build height on the Reflex 2 Pro
- ±2 μm
- Z-axis repeatability, C5 grade
Four Reflex 3D printers. One workflow.
Production and engineeringReflex 2: the OptiZone generation
The Amber Screen Pro, rated beyond 6,000 hours, behind an OptiZone light engine that evens out the light zone by zone. The Pro adds a 350 mm build height and 1,032 zones for batch production.
- Build volume
- 230 × 144 × 350 mm
- Light engine
- 1,032-zone OptiZone
Production and batch runs
£2,549ex VAT
- Light engine
- 161-zone OptiZone
- Screen
- Amber Screen Pro, 6,000 h+
Engineering prototypes
£1,529ex VAT
Tell us what you print and how many. We will tell you which one fits.
The Reflex 2 Pro, in HeyGears’ own film.
The flagship Reflex: the 350 mm build, the OptiZone light engine and the automated workflow around it.
Video: HeyGears on YouTube
From file to finished part, in six steps.
Every piece is made to work with the next: the resin carries its own profile, the slice tells the cure what to do, while the 3D printer watches each layer.
01Set upAn auto-levelling platform and automatic resin refill, so the 3D printer is ready in minutes.
02Choose the resinEvery UltraPrint resin carries a tuned profile for every Reflex.
03Prepare in Blueprint StudioOrient, support and slice in one click.
04PrintForce and residue sensors watch every layer. Blueprint Go tells you when it is done.
05WashUltraCraft Wash, with a deep-wash programme for each resin.
06CureUltraCraft Cure takes its settings from the slice, for full strength every time.
Even light, layer after layer.
OptiZone splits the screen into zones and evens out the light across them, so a part at the edge of the platform cures like one in the middle. Around it, the Reflex 2 watches every layer it prints.
1,032 light zones
On the Reflex 2 Pro, plus 161 on the Reflex 2, with light uniformity of 94% or better.
C5 grade Z axis
Layer error of 2 μm or less, so tall parts stay true.
Residue detection
Force feedback finds 0.15 mm of residue in the tank before the next print fails on it.
Amber Screen Pro
Rated beyond 6,000 hours, so the screen is not a running cost.
Engineering resins, tuned to the 3D printer.
UltraPrint resins come with a profile for every Reflex, from everyday modelling resins to tooling and wear-resistant production grades.
See every HeyGears resin
Parts off a Reflex.
Blueprint Studio comes with every 3D printer.
HeyGears’ own print preparation for every Reflex. Blueprint Go follows the print from your phone.
Supplied and supported in the UK.
Europac 3D has supplied and supported professional 3D printers in the UK since 1998. HeyGears joins the range on the same terms.
Advice before you buy
Which Reflex and which resins, matched to the parts you make.
Delivered and set up
Bench-top, so no installation. We get your team printing.
Resins and spares from the UK
Tanks, films, screens and every UltraPrint resin, ordered from us.
UK support
Our own team answers, here in the UK.
Talk to us about a Reflex.
Tell us what you print and we will match the Reflex and the resins to it, arrange a demonstration and confirm delivery. Every model has its UK price on this page.