.svg){kind=small}
UnionTech SLA resins
SR-9 SLA resin
An ABS-like SLA resin for UnionTech SLA 3D printers and the Standard White our bureau prints in. Large, detailed parts at a low material cost.
Key properties
Figures from the SR-9 datasheet linked below. Values vary with machine, processing and post-cure.
- Hardness
- Shore D 86
- Tensile strength
- 38–56 MPa
- Tensile modulus
- 2,589–2,695 MPa
| Hardness | Shore D 86 |
|---|---|
| Tensile strength | 38–56 MPa |
| Tensile modulus | 2,589–2,695 MPa |
| Flexural strength | 69–74 MPa |
| Flexural modulus | 2,692–2,775 MPa |
| Elongation at break | 12–20% |
|---|---|
| Notched Izod impact | 48–55 J/m |
| Heat deflection | 52 °C |
| Glass transition (Tg) | 62 °C |
| Density | 1.13 g/cm³ at 25 °C |